Description
The robot controller failed while communicating with the camera arg .
Consequences
Camera commands and results may have been lost.
Possible causes
This error may occur due to:
1 ) The camera is not connected to the controller.
2 ) The camera is out of power.
3 ) The camera's IP address is invalid.
4 ) The camera is not connected to the correct network interface. Typically only service ports are supported.
Recommended actions
Recommended actions
1 ) Check the cable connection between the robot controller and the camera.
2 ) Check the power and link LED lights on the camera.
3 ) Use RobotStudio to check whether the IP address is configured correctly.