| Countermeasure | Error Solution |
|---|---|
| The range of PF queue numbers is 1 to 16. Do one of the following: - Stop the task and check the parameter data specified in the SPEL command. Targets are the commands corresponding to the function name and row number in the system history. See the reference manual for correction instructions. Part feeder: Refer to "Part Feeding Introduction & Hardware (common) & Software - Software - Part Feeding SPEL+ Command Reference". - Restore the backup file that was operating correctly. - Update the controller firmware with the update tool. - Replace the controller SD. - If this error occurs repeatedly, contact us. | Reboot |
Loading fault information