[Servo board XX] (Regeneration amplifier (No. XX) code settings between the external axis servo parameter data and the power module do not match. (for E0x series controllers)

Error handling: Motor power OFF.
Error reset: Not possible.

Content: The power block setting in the external axis servo parameters (power block for the power regeneration axis) does not match the software setting.

Main causes:

1. The servo amplifier unit model in use differs from that specified in the external axis servo parameter file.

2. A problem with the power block board.

3. A problem with the servo board.

Countermeasures:

1. In auxiliary function “2002 External Axis Settings”, check the motor settings and whether the downloaded external axis servo parameter file matches the servo amplifier being used.

2. If the settings in 1 are correct but the error cannot be cleared, replace the servo amplifier unit.