Description
An error was detected in the CPU of the optional ACP02#8.
Subcode description
A CPU error was detected on ACP02#8.
Causes and remedies
| Cause | Remedy |
|---|---|
| ACP02 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the following boards. Save CMOS.BIN before replacing the board. • ACP02 board |
| ACP01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ACP01 board. Save CMOS.BIN before replacing the board. After replacing the ACP01 board, remove the SD card from the original ACP01 board and insert it into the new ACP01 board. |
| AIF01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the AIF01 board. Save CMOS.BIN before replacing the board. After replacing the AIF01 board, load CMOS.BIN saved before the alarm occurred. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |