Description
drive module The axis computer in arg is not connected to the host computer.
Consequences
The system enters the "System Failure" state. No action can be taken until the fault is corrected.
Possible causes
Causes include broken cables, poorly wired connectors, missing axis computer switches, or power outages.
Recommended actions
- Make sure the main power switch on the drive module is turned on.
- Make sure that the cable from the main computer through the switch to the axis computer is not damaged and that both interfaces are properly connected.
- Make sure the cable is connected to the correct port on the axis computer switch.
- Make sure the power supply of drive module is working properly.
- Restart the controller.