Description
Connection error of MotoLogix occurred.
Subcode description
Disconnected.
Causes and remedies
| Cause | Remedy |
|---|---|
| Communication stopped | 1. Check that the connectors on the connected network cable are correctly inserted. 2. Check whether the checksum contents are incorrect. If the checksum is incorrect, the transmitted data is ignored. 3. Increase the monitoring-timer parameter (S2C[1380]) setting. The unit is [msec]. Setting this to 0 selects the default time. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |