Description
The job loaded to camera arg is incorrect or incompatible with this version of RobotWare.
Consequences
The camera will reset to program mode.
Possible causes
- The job loaded to the camera is incorrect or incompatible with this version of RobotWare.
- The " Use Output to Rapid " configuration parameter is set to yes when it should be set to no.
Recommended actions
- If you do not plan to use the " Output to Rapid " feature, such as CamGetResult, then set the " Use Output to Rapid " configuration to No.
- If the "Output to Rapid" functionality is required, a correct job must be loaded into the camera.
- Make sure you have saved the fields in the Output to Rapid tab before loading the job.