Description
An error occurred when the Ethernet function was used.
Subcode description
IP address cannot be gotten or
cannot be updated via DHCP.
(LAN interface 2)
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings and operating conditions. • Operation of the DHCP server (when DHCP is used) • Network status (when DHCP is used) |
| Software (malfunction) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ACP01 board. Save CMOS.BIN before replacing the board. After replacing the ACP01 board, remove the SD card from the original ACP01 board and insert it into the new ACP01 board. |
| ACP01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, save CMOS.BIN and report the circumstances (operating procedure, etc.) to our service department. |