Description
The TOYOPUC board cannot be identified.
Subcode description
An error was found in the
specified number of registers
which are used by the system
data "INST. MESSAGE" of
allocation configuration.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the allocation settings for TOYOPUC. |
| Cable (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, check that the following connectors are connected and fully inserted. • PCI connector of the TOYOPUC board |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |