Description
SVSPOT was executed before motor gun automatic tuning had been performed.
Subcode description
Sub Code: Gun number
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Perform servo gun auto tuning according to the following procedure. 1. Select Welding > Servo Gun Auto Adjustment. 2. Select playback mode and press Execute after servo ON. 3. After completing automatic servo-gun adjustment, press the Register button. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |