Description
An error occurred at form cutting operation.
Subcode description
Invalid transverse-distance setting.
- Rectangle: transverse distance < 1.0, transverse distance > sqrt(maximum diameter^2 - longitudinal distance^2), or transverse distance > maximum diameter.
- Transverse distance < 0, or transverse distance > maximum diameter - 2*radius.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the lateral data settings. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |