Description
Incorrect teaching point for search detection. The search start point and the motion target point are the same, or the distance between the two points is too short.
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings. • Change the positions so that the search start point and the motion target position are not identical. • Setting: Increase the distance between the search start point and the motion target position. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |