Description
An error occurred during high speed Ethernet client communication
Subcode description
Explanation 1:
Setting error
Explanation 2:
A data error was detected while acquiring load data in the RC task.
Causes and remedies
| Cause | Remedy |
|---|---|
| Explanation 1 Parameter (incorrect setting) | Reset the alarm and check that the following parameters are set to 0. • S2C541 • S2C542 |
| Explanation 2 Software (malfunction) | 1. Reset the alarm and execute the communication processing again. 2. If the alarm recurs, save CMOS.BIN and report the circumstances (operating procedure, etc.) to our service department. |