Description
An error occurred when the Ethernet function was used.
Subcode description
Static route setting is faulted.
(LAN interface 2, route 1)
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (malfunction) | Check the following settings. • Static route setting for the LAN interface in maintenance mode • Leased IP address when obtaining the IP address using DHCP |
| ACP01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, save CMOS.BIN and report the circumstances (operating procedure, etc.) to our service department. |