Description
An error occurred when the Ethernet function was used.
Subcode description
NAT setting is faulted.(LAN
interface 3)
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (malfunction) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ACP01 board. Save CMOS.BIN before replacing the board. After replacing the ACP01 board, remove the SD card from the original ACP01 board and insert it into the new ACP01 board. |
| ACP01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, save CMOS.BIN and report the circumstances (operating procedure, etc.) to our service department. |