Description
The CALL/JUMP/PSTART destination job could not be executed. An attempt was made to call or jump to a job whose control group cannot be controlled. An attempt was made to start the control group job that could not be operated.
Subcode description
Sub Code:The related control-
group
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings. • Ensure that the control group of the CALL source job includes in advance the control group used by the CALL destination job. • Do not use the "PSTART" instruction to start a job containing a control group that is already moving. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |