Description
The communication setting of the IP address needs to be recorded when using network function for YRC1000. The file with these records is called the network setting file. By sum check, which is performed when turning the power on, this network setting file is checked if it is correct. This alarm occurs if this file is found to be incorrect.
Subcode description
The network setting file is
damaged.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (data error) | 1. Turn the power off and back on. 2. If the alarm recurs, initialize the corresponding data in maintenance mode, then configure the network again. |
| AIF01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the AIF01 board. Save CMOS.BIN before replacing the board. After replacing the AIF01 board, load CMOS.BIN saved before the alarm occurred. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |