Description
The processing requested by the MotoPlus application from the MM task did not finish within the specified time. This alarm occurs when an internal system inconsistency prevents the MM task from recovering from an unexpected state within the specified time.
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (malfunction) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ACP01 board. As a precaution, save CMOS.BIN before replacing the board. After replacing the ACP01 board, remove the SD card from the original ACP01 board and insert it into the new ACP01 board. 3. If the alarm recurs, save CMOS.BIN and report the circumstances (operating procedure, etc.) to our service department. |