Description
The rotary switch setting on the ASF01 board has an error.
Subcode description
Subcode: switch number recorded in the ASF01 board.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | 1. In maintenance mode, open File - Initialize and execute Safety Board FLASH Data Reset. 2. Turn the power off and back on. |
| Software (incorrect setting) | Check the rotary switch settings (0-7) on the ASF01 boards (#1-8). |
| ASF01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ASF01 board. Save CMOS.BIN before replacing the board. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |