Description
The program could not return to the CALL source job. The CALL source job does not exist in the job call stack.
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings. • If there is an invalid RET instruction in the starting job, delete that instruction. • Check whether the RET instruction was executed when no job existed in the job call stack. In this case, execute from the main (start) job. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |