Description
The temperature sensor in the CPS01KA unit in the control cabinet was activated. The temperature inside the control cabinet rose abnormally.
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Controller cabinet (temperature rise) | Wait until the inside of the controller cabinet has cooled before turning ON the power. |
| Cable (abnormal) | Check the power cable connection of the overheating CPS01KA unit. • CPS01KA unit-CN101 • SDCA01 board-CN509 |
| CPS01KA unit (abnormal) | Replace the CPS01KA unit. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |