Cause:
After the joint workspace is set to "Trigger inside the space and stop with an error" or "Trigger outside the space and stop with an error" mode, the position of robot additional axis 5 triggers this workspace.
Troubleshooting:
Check whether the position of the robot's additional axis 5 has triggered the joint workspace.
Solution:
If the joint workspace is in "Trigger inside the space and stop with an error" mode, jog robot additional axis 5 outside the spatial range set for the joint workspace.
*** ***If the joint workspace is in "Trigger outside the space and stop with an error" mode, jog robot additional axis 5 inside the spatial range set for the joint workspace.
Case sharing:
Joint workspace 1 is configured as follows:
Mode: Trigger inside the space and stop with an error
A minimum***maximum*** Additional axis minimum***maximum 0
A minimum***maximum*** Additional axis minimum***maximum 0
A minimum***maximum*** Additional axis minimum***maximum 0
A minimum***maximum*** Additional axis minimum***maximum 0
A minimum***maximum*** Additional axis minimum 1***maximum 20
A minimum***maximum*** Additional axis minimum***maximum 0
After joint workspace 1 is activated, errors 728 and 710 will be reported if robot additional axis 5 moves into the range [10,20].