Description
Brake signal is incorrect.
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Cable (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, check that the following cables and connectors are connected and fully inserted. • SDCA01 board-CNBX • ASF01 board-CNBX, CN207 (AXDIN, AXIN) 3. Correct the brake wiring. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |