Description
The cable for the general-purpose I/O signals is broken, or a connector is loose.
Subcode description
Universal output 2 for SV#1
(SV#2) is inconsistent with
Universal input 2 for SV#2
(SV#1).
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | 1. Turn the power off and back on. 2. If the alarm recurs, check that the following cables and connectors are connected and fully inserted. • ASF01 board-CN204 • CNBX connectors on the SDCA01 board and ASF01 board |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |