Description
The spot welding did not complete within the specified time. Neither the welding completion signal nor the welding error signal was received from the timer conductor within the set time.
Subcode description
Sub Code: Welder number
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings. • Turn ON the timer contactor power supply. • If the system configuration requires time for the timer to respond, increase the timeout setting. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |