The first positioner axis is not at the zero position; calibration failed (For ER series, version V5.0)

51063

Alarm cause: When calibrating the second positioner coordinate system, the coordinate system of the first positioner axis must be at the zero position; otherwise, a large calibration error will result

Corrective measures: Move the first positioner axis to the zero position before calibration

Applicable equipment

Source: Fault JSON · ESTUN_fault_codes_zh_en.json · SHA-256 e318b3bb20315d070a7f50bd7649bf7dfd7d178030a4f7c736a5aa22f48095f9 · 51063

Brand	ESTUN
Updated	2026-10-27

51063

The first positioner axis is not at the zero position; calibration failed (For ER series, version V5.0)

51063

Alarm cause: When calibrating the second positioner coordinate system, the coordinate system of the first positioner axis must be at the zero position; otherwise, a large calibration error will result

Corrective measures: Move the first positioner axis to the zero position before calibration

Applicable equipment

Source: Fault JSON · ESTUN_fault_codes_zh_en.json · SHA-256 e318b3bb20315d070a7f50bd7649bf7dfd7d178030a4f7c736a5aa22f48095f9 · 51063

Brand	ESTUN
Updated	2026-10-27