Description
The TOYOPUC board cannot be identified.
Subcode description
The number of registers specified for the system data Current pulse position of each axis in the allocation settings is incorrect.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the allocation settings for TOYOPUC. |
| Cable (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, check that the following connectors are connected and fully inserted. • PCI connector of the TOYOPUC board |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |