Description
The motion speed could not exceeded the speed specified by BASICV. The motion speed might have shifted to the speed reduction motion before BASICT has passed because BASICT was too long.
Subcode description
Sub Code: Signifies the axis in
which the alarm occurred
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | 1. Reset the alarm. 2. Increase the measurement job's specified speed or decrease the specified BASICV value. Alternatively, lengthen the measurement section. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |