Description
The YRC1000 verifies that the AIF01 board type (CMOS memory size) which is detected during startup is the same as the type set at the time of system configuration. This alarm occurs if the YRC1000 detects an error in the verification process.
Subcode description
The CMOS memory capacity is
different from its initial setting.
Causes and remedies
| Cause | Remedy |
|---|---|
| ACP01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ACP01 board. Save CMOS.BIN before replacing the board. After replacing the ACP01 board, remove the SD card from the original ACP01 board and insert it into the new ACP01 board. |
| AIF01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the AIF01 board. Save CMOS.BIN before replacing the board. After replacing the AIF01 board, load CMOS.BIN saved before the alarm occurred. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |