[Cause]
Image backup failed.
[Countermeasure]
Perform image backup again. %x is a numerical value indicating the reason for the failure.
+-----------------+--------------------------------------------------------------------------------------------+ | numerical value | Possible causes and countermeasures | +-----------------+--------------------------------------------------------------------------------------------+ | 0x1 | But the number. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x2 | Could not get the necessary memory. Please contact the service centre. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x3 | Cannot obtain information from FROM. Contact the service center. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x4 | Identify the remaining capacity of the equipment. In the case of MC, confirm whether FLASH | | | ATA has been inserted. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x5 | Unable to start creating FROM***.IMG. Confirm the status of the device. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x6 | Unable to read FROM. Try replacing FROM and the motherboard. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x7 | Unable to write data to FROM***.IMG. Confirm the status of the device. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x8 | Cannot create FROM***.IMG. Check the following: A backup file already exists and is set to | | | Write protect. FLASH ATA was removed during backup. Communication with the TFTP server was | | | interrupted during backup. The TFTP server is not running. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x9 | Confirm the remaining capacity of the device. | +-----------------+--------------------------------------------------------------------------------------------+ | 0xa | Unable to start creating SRAM**.IMG. Confirm the status of the device. | +-----------------+--------------------------------------------------------------------------------------------+ | 0xb | Unable to write data to SRAM**.IMG. Confirm the status of the device. | +-----------------+--------------------------------------------------------------------------------------------+ | 0xc | Cannot create SRAM**.IMG. Check the following: A backup file already exists and is set to | | | Write protect. FLASH ATA was removed during backup. Communication with the TFTP server was | | | interrupted during backup. The TFTP server is not running. | +-----------------+--------------------------------------------------------------------------------------------+ | 0xd | Documents used for internal processing may have been damaged. Recommence backup. | +-----------------+--------------------------------------------------------------------------------------------+ | 0xe | Documents used for internal processing may have been damaged. Recommence backup. | +-----------------+--------------------------------------------------------------------------------------------+ | 0x20 | Network initialization failed. Check the cable connection status and BOOTP server status. | +-----------------+--------------------------------------------------------------------------------------------+