Description
An error occurred during startup processing of the CP1616 board.
Subcode description
No IP address or device name is set for the CP1616 board connected to PCI No. 2.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | 1. Reset the alarm. 2. If the alarm recurs, perform the following operations as described in the manual. • Use the configuration tool from SIEMENS (STEP 7) to set the IP address and device name on the CP1616 board. |
| CP1616 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the CP1616 board. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |