Description
An error occurred in processing on the TOYOPUC side.
Subcode description
The PCI bus state of the
TOYOPUC turns to "ER".
Causes and remedies
| Cause | Remedy |
|---|---|
| TOYOPUC (abnormal) | 1. Reset the alarm. 2. Check the following settings. • Remote set to OFF/ON status • Power OFF/ON status: Perform OFF/ON remotely or at the power supply. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |