Description
The ASF01 board is configured by duplicated systems to check operations each other. Either of the duplicated systems has detected hardware setting error of the other system
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the rotary switch settings (0-7) on the ASF01 boards (#1-8). |
| ASF01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the ASF01 board. Save CMOS.BIN before replacing the board. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |