Description
The distance between fixed gun tip and movable gun tip exceeded the allowable limit while executing correction operation in the GUN TEACH POSITION CORRECT Mode.
Subcode description
Sub Code: Signifies the axis in
which the alarm occurred
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the following settings. • Gun axis home position • Pulse-to-stroke conversion in the gun condition file • Wear compensation value |
| Mechanism (interference) | 1. Check whether there is a foreign object between the workpiece and the welding gun. 2. Check whether the electrode has come off. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |