Description
The encoder backup battery voltage is too low. (2.8V or less)
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Encoder (battery abnormal) | Replace the battery. |
| Cable (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, check that the internal cables are connected and fully inserted. |
| Motor (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, replace the motor. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |