Description
The TOYOPUC board cannot be identified.
Subcode description
In the output side setting of
allocation configuration data, the
set number to use the input side
R-register of the TOYOPUC
exceeds the R-register limit.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Check the allocation settings for TOYOPUC. |
| Cable (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, check that the following connectors are connected and fully inserted. • PCI connector of the TOYOPUC board |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |