Description
An error occurred in the ASCII-IF control processing.
Subcode description
The start/end step number in the
PLAYBACK file is wrong at the
time of IBGNSTART
PLAYBACK=ON instruction
executed.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Change the job point numbers in the playback file so that its start/end job points match the start/end job point numbers of the recorded job. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |