Description
Communication error of the force sensor board occured.
Subcode description
Subcode: 1000 + channel x 100 + cause.
Causes:
0: transmission-completion error
1: reception timeout
2: break received
3: framing error
4: parity error
5: overrun error
6: received-length error
7: no STX control character
8: no ETB control character
9: BCC error
10: sequence-number error
11: sensor-detection error
Causes and remedies
| Cause | Remedy |
|---|---|
| Hardware (malfunction) | 1. Check the following items, then turn the power off and back on. • Communication cable connection status • Type of the connected force sensor 2. If the alarm recurs, save CMOS.BIN and report the circumstances (operating procedure, etc.) to our service department. |