Description
Setting of the Safety Fieldbus function is incorrect.
Subcode description
The safety slave and standard master were used simultaneously on the 1 channels of the DeviceNet board.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | Under "Maintenance Mode" - "System" - "Setup" - "Optional Boards", display the slot (channel) configured for DeviceNet Safety and set the board mode to slave. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |