Description
Connection error of MotoLogix occurred.
Subcode description
Connection failed.
Causes and remedies
| Cause | Remedy |
|---|---|
| Connection timeout | 1. Check that the connectors on the connected network cable are correctly inserted. 2. Check whether the checksum contents are incorrect. If the checksum is incorrect, the transmitted data is ignored. 3. Change the timeout-monitoring parameter (S2C[1381]). The unit is [sec]. Setting this to 0 makes the time limit unlimited. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |