Description
Subcode description
Calibration could not be
executed.
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (incorrect setting) | 1. Reset the alarm. 2. Check the robot-coordinate or pixel-coordinate values used for calibration. Set the robot coordinate values and pixel coordinate values for calibration in user variables. 3. Check the user-variable number in the calibration file. Correctly set the user variable numbers in the calibration file. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |