Description
The temperature sensor inside the CPS01KA unit in the control cabinet was activated and detected an abnormal temperature.
Subcode description
Causes and remedies
| Cause | Remedy |
|---|---|
| Controller cabinet (temperature rise) | If LED (OHT) on the surface of the CPS power supply unit is lit, wait for the inside of the control cabinet to cool before turning the power ON again. |
| CPS01KA unit (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, replace the following units. • CPS01KA unit |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |