Description
An error occurred when the Ethernet function was used.
Subcode description
IP address cannot be gotten or
cannot be updated via DHCP.
(LAN interface 3)
Causes and remedies
| Cause | Remedy |
|---|---|
| Software (malfunction) | Check the following settings and operating conditions. • Operation of the DHCP server (when DHCP is used) • Network status (when DHCP is used) |
| ACP01 board (abnormal) | 1. Turn the power off and back on. 2. If the alarm recurs, save CMOS.BIN and report the circumstances (operating procedure, etc.) to our service department. |