Description
The number of short circuits during welding decreased substantially. (Hole detection)
Subcode description
Subcode: error number reported by the welding power source.
Causes and remedies
| Cause | Remedy |
|---|---|
| Arc welding power supply (abnormal) | 1. Check whether the welding-current command is too high. 2. Check whether the setting range C62 is too large. 3. Check whether the wire stick-out is too short. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |