8253

Category: Alarm

Cause

1. The drive power cable (U V W) is short-circuited to ground
2. The motor is short-circuited to ground
3. Drive fault

Corrective action

1. Disconnect the motor cable and measure whether each drive power cable U V W is short-circuited to ground (PE). Rewire or replace the drive power cable.
2. After ensuring that the drive power cable and motor cable are securely connected, measure whether the insulation resistance between each drive U V W terminal and the ground wire (PE) is in the megohm (MΩ) range. Replace the motor.
3. Remove the drive power cable from the servo drive. If the fault is still reported after repeatedly powering on, replace the servo drive.