[Cause]
PowerWaveErrorCode No.302 occurred. The production monitoring “Weld Curve” environment settings could not be saved when the welding equipment was powered off.
[Countermeasure]
Check the environmental setting of the Welding Curve for production monitoring.
代码
If the problem persists, before performing any other operations (power-off or jogging) after this alarm occurs, use the abnormal-state recording function ("Abnormal State Record" in the auxiliary menu) to obtain an image backup and contact the service center. If that function cannot be used, record the conditions and operating steps up to the alarm, obtain an image backup, and contact the service center.