Description
The self-diagnostic function for the general-purpose safety input signals of the ASF02 board and ASU03 unit detected an error.
Subcode description
The meaning of each sub code is
as follows:
D01:XIN01
D02:XIN02
D03:XIN03
D04:XIN04
D05:XIN05
D06:XIN06
D07:XIN07
D08:XIN08
D09:XIN09
D10:XIN10
D11:XIN11
D12:XIN12
D13:XIN13
D14:XIN14
D15:XIN15
D16:XIN16
Causes and remedies
| Cause | Remedy |
|---|---|
| Cable (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, check the connectors and other connections of the connected device. |
| ASF01 board (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, replace the ASF01 board. |
| ASF02 board (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, replace the ASF02 board. For a system with multiple ASF02 boards connected, replace the ASF02 board connected to the signal that generated the alarm. |
| ASU03 unit (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, replace the ASU03 unit. For a system with multiple ASU03 units connected, replace the ASU03 unit connected to the signal that generated the alarm. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |