The taught data is corrupted. (for E0x series controllers)

Error handling: Motor power OFF.
Error reset: Possible.

Description: The database (link table) used to control taught data in user memory has been corrupted (for example, after the editor accesses taught data).

Main causes:

1. The file system on the CF card is corrupted.

2. The main CPU board is faulty.

3. A problem with the power sequence board.

4. The AVR is faulty.

Countermeasures:

1. When this error occurs, promptly set switch No. 8 of the DIP switch (dual in-line package switch) on the main CPU board to ON, then perform initialization and reload the taught data.

[NOTE]
The system memory cannot be completely initialized using the SYSINT command or auxiliary function 0805 System Initialization, because some system data is retained.

2. If this error still occurs, replace the CF card.

3. If this error still occurs, replace the main CPU board.

4. If this error still occurs, replace the power sequence board.

5. If this error still occurs, replace the AVR.