[Cause]
This alarm indicates that, when DIP switch 10 on the slave side of the InterBus board is ON, the baud rate setting saved in the controller does not match the baud rate setting of the InterBus board DIP switches.
[Countermeasure]
Take any of the following responses:
1. Turn OFF DIP switch 10 on the slave side of the InterBus board.
2. Change DIP switch 9 on the slave side of the InterBus board to match the controller setting.
3. Change the controller baud rate setting. Refer to sections 4.4 and 5.2.2 of the InterBus Function (for Phoenix Contact PCI boards) Operator's Manual.