Description
An error occurred during data transmission. (This alarm occurs when received data cause inconsistency on the system although the transmission protocol is correct. Mainly, this alarm occurs due to an illegal transmission or erroneous report at the data sending side.)
Subcode description
Received EOT while waiting
ENQ.
Causes and remedies
| Cause | Remedy |
|---|---|
| Data transfer (abnormal) | 1. Reset the alarm. 2. If the alarm recurs, check that the communication settings or the sender's data settings are correct. |
| Other | If the alarm occurs again after implementing the countermeasures, contact our service department and describe the circumstances when CMOS.BIN was saved (operating procedure, etc.). |